What are the requirements for labels used in round bottle labeling machines?

Round bottle labeling machine selection of self-adhesive roll labeling paper, mainly used in pharmaceutical, daily chemical, food and other kinds of suitable for vertical placement of round bottle products active labeling. So, what are the requirements for the labeling machine used for round bottles?

　　1, shape requirements.

　　The most basic requirement is to let the label manufacturer to make the label into a volume, the label into a volume before the labeling machine to use, the label should be cut appropriate, the paper can not have wrinkles, these round bottle labeling machine on the labeling of the development of one of the specifications. Tail sealer

　　2, scale requirements.

　　Different products require different label scale, label scale is able to be customized according to customer requirements.

　　3, raw material requirements

　　Round bottle labeling machine labeling raw materials can be based on customer requirements, can be self-adhesive labels, self-adhesive film labels, electronic supervision code labels, bar code labels, etc.. However, the label paper will affect the quality of labeling machine labeling, try to pick a better raw material.

　　4, processing requirements.

　　Label processing quality requirements after slitting the bottom paper is flat on both sides, no raggedness, to prevent the bottom paper from breaking when the tension changes. Die-cutting to prevent cutting through the backing paper or adhesive inside the label into the backing paper, showing no mark and tearing the backing paper phenomenon. In addition, before labeling to eliminate static electricity in the label, because static electricity will cause labeling when not out of the label or present labeling inaccurate phenomenon.

　　5, the backing paper requirements.

　　The backing paper is also an important indicator of the control of the round bottle labeling machine machine, the appearance of the backing paper must be coated with silicon evenly, the thickness should also be uniform, so that there is a good resistance to pull the ability to not pull the label bad, light transmission should also be good. Automatic single-side labeling machine