Explain the five factors that affect the work of the labeling machine

?The working principle of the labeling machine is that the working process starts with the boxes being fed to the labeling machine at a constant speed on a conveyor belt. Mechanical fixtures separate the boxes at a fixed distance from each other and push the boxes in the direction of the conveyor belt The mechanical system of the labeling machine consists of a drive wheel, a labeling wheel, and a reel. The drive wheel intermittently drags the labeling belt through the reel and pulls it out while passing over the labeling wheel, which presses the labeling belt against the case. An open-loop displacement control is used on the reel to maintain the tension of the label belt because the labels are closely attached to each other on the label belt, so the label belt must constantly start and stop.

??Five key factors that affect the performance of automatic labeling machines.

??

I. Traction mechanism

??Directly provide label peeling power, the design needs to consider slippage, wear and other factors.

??Second, the mechanical structure

??There is no solid mechanical structure as a foundation, vibration during operation, or movement is not in place and other situations occur at any time, and then the good electrical configuration can not run, just like the Chery car with BMW engine must not reach the performance of BMW cars. Content from Jun Gang Automation

??Third, the adjustment mechanism

??Labeling requirements are ever-changing, the need to adjust the machine often, if there are defects in the design of the adjustment mechanism, will not be able to achieve the labeling effect.

??Fourth, the labeling head

??The labeling effect cannot be guaranteed if the labeling accuracy is not guaranteed. Therefore, the marker belt around the correction mechanism, compression mechanism, electric eye detection mechanism and traction mechanism is crucial, equivalent to the engine of the car

??V. Electrical configuration

??Electrical configuration directly affects the stability of operation, high-quality electrical configuration to ensure the performance of the labeling machine